Toyota GT86 Mishimoto Red Performance Air Intake FR-S BRZ

In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This FR-S / BRZ intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings.

The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16% increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This FR-S / BRZ intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose.

Features
Direct fit for the 2013+ Subaru BRZ and Scion FR-S
Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
No bumper removal required and installs in under 30 minutes
Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit andMishimoto Oil Fill Cap
Black powder-coated airbox keeps unwanted hot air from entering the air filter
Wrinkle black aluminum intake pipe includes CNC-machined MAF housing and air straightener
Fully serviceable oiled air filter provides 16% increase in filter surface area compared to the stock filter
Improves engine tone
Smooth design eliminates restrictions and improves airflow
Available with a black, blue or red silicone induction hose
Designed in Delaware, USA and filter made in USA
Purchase Includes
(1) Wrinkle Black Aluminum Intake Pipe w/ CNC-Machined MAF
(1) Airbox w/ Protective Edging
(1) High-Flow Oiled Filter
(1) Silicone Induction Hose
(1) Sound Generator Cap
(2) Worm-Gear Clamps
Mounting Hardware
Pipe Diameter
2.75" (70mm) I/D
3.00" (76.2mm) O/D
Specifications
Max Gain: 7 whp & 5 wtq at 6750 RPM Tech specs
Steel, Black Powdercoat Airbox material
Mandrel-Bent Aluminum Pipe material
38 g of oil on filter Oiled filter
Engine Codes
FA20
4U-GSE
Chassis Codes
ZC6
ZN6
Also Fits
13+ Subaru BRZ
13+ Scion FR-S
Installation Torque Specifications
22 in-lbs (2.5N*M) recommended for all worm-gear clamps.These clamps have an operating range of 18-27 in-lbs 2-3N*M.Do not exceed the maximum torque rating of 27 in-lbs (3N*M).