Motul 8100 Eco-Lite 0w-20 Fully Synthetic Car Engine Oil 1L

General Details:

Content [litre] 1
Packing Type Tin
SAE viscosity class 0W-20
Specification API SERVICE SP-RC
Specification ILSAC GF-6a
Manufacturer Approval GM dexos1 GEN2
Oil - manufacturer recommendation CHRYSLER MS 6395
Oil - manufacturer recommendation FIAT 9.55535-CR1
Oil - manufacturer recommendation FORD WSS M2C 947 A
Oil - manufacturer recommendation FORD WSS M2C 947 B1

Application:

Recommended for recent petrol engines, naturally aspirated or turbocharged, indirect or direct injection that require an oil with low friction and very low HTHS (High Temperature High Shear) viscosity.

Suitable for modern petrol engines requiring a viscosity grade 0w-20 and fuel economy engine oil (API SP-RC, API SP and/or ILSAC GF-6a standards).

Approved GM-dexos1™ Gen2 for all new GM petrol engines requiring this approval: Buick, Cadillac, Chevrolet, GM, GMC, Opel and Vauxhall.

Catalytic converter friendly.

This oil can be mixed with synthetic or mineral oils.

Benefits:

Outstanding oxidation resistance, anti-deposit protection, engine cleanliness, anti-wear protection and enhanced performance at cold temperature for fuel economy savings
Improved protection against LSPI for downsized direct injection turbocharged petrol engines
Extended drain intervals, pistons/rings cleanliness, seals compatibility and reduced content of Phosphorus for after treatment systems compatibility are enhanced

High thermal stability and outstanding resistance at high temperatures to avoid black sludge and viscosity increase
Meets highly demanding requirements of performance and durability
Minimises lubricant hydrodynamic friction

Improves oil flow at start up, faster oil pressure build-up, faster rev raisings and reach operating temperature faster
Environment friendly - reduces fuel consumption and therefore minimises greenhouse gases (CO2) emissions

Specifications:

Standards:
API SP-RC *
ILSAC GF-6a
Approvals:
GM dexos1™ Gen2 (under n° D10688HJ011)

Performances:

Chrysler MS-6395
Ford WSS M2C 947-A / 947-B1
Fiat 9.55535-CR1

Recommendations:

Petrol engines, including; Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, and Toyota
* API SP standard is fully backward compatible over API SN requirements and all former API standards