Toyota Supra GR A90 MK5 HKS Cold Air Intake Full Kit

Features

By adopting a carbon base material with a beautiful twill texture similar to dry carbon racing suction, it creates a sense of laceiness and luxury.
The shortage of intake air, which is a concern due to covering the open type cleaner with a box, has been improved by installing an intake duct separate from the genuine intake port. A stable intake air volume can be secured.
By replacing the genuine intake with a cold air intake full kit, we can reduce the weight by about 500g.
The HKS emblem with special processing (slide spin processing) included in the kit creates a more luxurious feeling. Contributes to dressing up in the engine room.
Since the cold air intake box can be purchased separately, it can also be used as an upgraded item for vehicles equipped with dry carbon racing suction.

Genuine intake (approx. 3.1 kg)
Cold intake (approx. 2.6 kg)
Slide spin processing emblem

By optimizing the piping with racing suction, adjusting the air flow, and adding a duct to the air intake box, sufficient fresh air can be taken in and the intake resistance can be reduced in the entire area compared to the genuine intake.

[0 → 120km / h → stop → idling 45 seconds] is set as one cycle, and a total of 6 cycles are implemented.
Measures the intake air temperature in the power flow during STOP & GO driving.
Outside temperature during test: 23.5-26 ℃

By installing an air filter in the space covered by the box, fresh air can be taken in smoothly, and it is possible to reduce the rise in intake air temperature that tends to occur after idling or on congested roads.