Toyota Supra A80 [1JZ] Trust GReddy Turbine Kit (TUNER KIT)

The compressor cover uses the same type of S cover as the Westgate specification with an emphasis on suction efficiency.

This is a tuner KIT that requires intake piping production and ECU settings.
(Be sure to install it at a professional shop with specialized knowledge.)

specification

・ The minimum boost pressure of 0.95k (320ps) can be handled by genuine injectors and genuine fuel pumps (this may not be the case depending on the accessories).

・ Blow-off valve must be installed

・ Over 400ps is possible by changing the ECU reset, injector, and fuel pump (outputs about 425PS at Boost 1.4K).

≪Because it is a tuner KIT, it is necessary to separately manufacture and prepare the following. ≫

・ Compression tube
・ Suction tube
・ Air cleaner
・ Hose, hose band
・ Blow-off valve

«Accessories»

turbine body (TD06SH-20RX, 1JZ dedicated exhaust housing, machined aluminum actuator)
Oil pressure hose
, oil return tube (because for JZX100, needs to be modified, depending on vehicle type)
turbine side one
engine side 1 Pieces
/ Gaskets: Turbine IN, Turbine OUT, Exhaust Manifold, Oil Return, Copper Washer

[Compatible E / G model] 1JZ-GTE VVT-i engine-equipped vehicle
Model year: 96.09-04.11

TRUST CODE: 11510097
JAN CODE: 4991995664567