R32 HKS Hipermax Max IV GT Front and Rear Coilover Kit

Specifications:

- Front Damping Force Adjustment: Yes
- Rear Damping Force Adjustment: Yes
- Damping Force Adjustment: Yes
- Levels of Damping: 30 levels
- Front Upper Mount Type: Rubber
- Rear Upper Mount Type: Rubber
- Shock Absorber Design: Monotube
- Shock Absorber Type: Gas Charged
- Without External Reservoir
- Front Spring Rate: 392 lbs/in (7 kg/mm)
- Rear Spring Rate: 392 lbs/in (7 kg/mm)
- Front Spring Tall: 9.8" (250 mm)
- Rear Spring Tall: 8.0" (200 mm)

Features:

- Single Tube Damper Design
- Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride.
- Dust Boot
- Protect the shaft from the flying stones.
- PNE Coating
- Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
- "M Shaft"
-  With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
- New Design Needle
- Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
- Reduction of Unsprung Weight
- In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
- 30 Step Damping Force Adjustment
- 30 levels of dampening adjustment allow fine tune adjustment for street or circuit.