DeatschWerks Nissan G20 / SR20 / 240sx SR/KA S13 S14 S15 550cc Side Feed Injectors

Every Deatschwerks injector is a drop-in fitment for its application. Deatschwerks injectors are engineered to fit the OEM harness, OEM fuel rail and OEM manifold.

All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability.

Most aftermarket injectors go straight from the production line to the shipping department. Deatschwerks, has added a crucial step of flow balancing and quality assurance testing on EVERY set of injectors they produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure you receive the best end product. All of Deatschwerks testing is performed in-house on their custom built New Age Technologies injector flow bench.

Below is a brief outline of some of their testing:
6-point coil test
Leak testing from 0-100psi
RPM Ramp 500-10,000 rpm
Pulse Width Ramp 0.5-17ms
Spray pattern analysis (open and pulsed)


Every set of Deatschwerks injectors is accompanied by a full color injector report. This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as:
Fuel pressure flow rate conversions
cc/min and lbs/hr conversions
BSFC based horsepower maximums
System balance and flow variance Applications


Deatschwerks injectors are Direct factory replacements for their listed applications. In addition, Deatschwerks offers a comprehensive line of universal injectors which are available for customers whose applications are not listed in their catalog. Their Universal applications include high impedance, low impedance, narrow body, wide body, and several different connector options.