Stoptech Nissan 240SX S14 - Drilled and Slotted Discs / Street Pads

A set of StopTech rear replacement Sport Rotors is a great way to match the aesthetics of a StopTech Big Brake Kit. Most StopTech Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting.

This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues. Power Alloy metallurgy is an exclusive feature of many StopTech rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.

Nearly all StopTech 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.

StopTech Street Performance brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate.

This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad. StopTech Street Performance brake friction features either precision cut or shaved backing plates and mechanically attached shims; these small details ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration.

In addition to these features StopTech Street Performance are scorched; this additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the break-in process.

Kit include:

StopTech Power Slot 89-6/96 Nissan 240SX Slotted & Drilled Left Front Rotor - 127.42040L
StopTech Power Slot 89-6/96 Nissan 240SX Slotted & Drilled Right Front Rotor - 127.42040R
StopTech Power Slot 89-98 Nissan 240SX Slotted & Drilled Left Rear Rotor - 127.42042L
StopTech Power Slot 89-98 Nissan 240SX Slotted & Drilled Right Rear Rotor - 127.42042R
StopTech Street Touring 89-06/96 Nissan 240SX Front Brake Pads - 308.04220
StopTech Street Touring 89-98 240SX Rear Brake Pads - 308.02720