350z HR Z1 Motorsports RACE Cold Air Intake Kit - VQ35HR 2007-2008

The improved density and flow rates help invigorate the output and even sound of your VQ35HR engine with a deeper growl in low RPMs and aggressive tone in higher RPMs.

Upgraded Velocity Stacks

Included with the RACE Cold Air Intakes these 5 3/4'' velocity stacks help push the potential of these intakes EVEN FURTHER! This upgrade adds larger filters and velocity stacks which allow for better airflow producing even more power gains than the intakes alone. This upgrade has produced an additional 5+ RWHP consistently on several Z's with dyno tune. This upgrade produces more horsepower and torque across the entire RPM range.

Aesthetically Pleasing

While the primary focus in aftermarket intakes may be enhanced performance, our focus was to provide a product that performed tremendously while providing a show quality finish and appearance. Available in two finishes, black and polished aluminum with your choice in Red, Black, or Blue Silicone Couplers. The intake also features MAF bosses that have been relocated to the bottom side of the intake piping for a stealth like appearance.

Performance

While every cars result may differ depending on mods and tune, Z1 Motorsports was able to achieve an increased 16whp and additional 13lb-ft of torque with peak gains of 20whp and 15lb-ft of torque at the peak of the power band in house on a car previously equipped with just a Full Tomei Expreme Exhaust! No re-tune was performed to achieve these results! You can expect even greater results when re-tune is performed.

Intake Kit Includes:

(2) Aluminum Intake Hard Pipes
(2) Z1 High Flow Intake Filters
(2) Z1 High Flow Velocity Stacks
(4) Silicone Straight Reducer Hose
(2) Silicone Throttle Body to Hard Pipe Adapter
(2) Aluminum 90° Hose to Filter Adapter
(1) Z1 Silicone Side PCV Breather Hose Set
(12) Intake Coupler Clamps
(1) Installation Instructions

***CUSTOM POWDER COATING ARE NOW AVAILABLE***

You may now chose to add your choice of any powder coated colors to your Z1 Intakes in the options below! Custom colors available upon request. Please contact our sales department to check costs and lead times.

Mix and match couplers and powder coating to fully customize your intake system to match your ride.

Available in:

Wrinkle Red
Wrinkle Black

Please note: Since this is a custom option, some powder coating services may add delay on shipping your order. We do however, strive keep the most popular colors in stock.