350z Chase Bays Power Steering Kit

Our over-engineered Dual-Baffled Power Steering Reservoir (aeration and spillover proof) is at the core of this kit.  Chase Bays only uses the highest quality components available. Our reservoir is constructed of 6061 aluminum and is anodized black with a laser etched cap. The reservoir itself uses our own bracket design to bolt in easily to factory Nissan at the stock location (unless swapped).

Dual Baffled Power Steering Reservoir
Countless hours of research and development were put into our newest Power Steering Reservoir. This isn’t as simple as putting 2 fittings on a fluid container and calling it a day. It is far more complex. The smaller fitting on the Reservoir is the fluid return from the rack. It can be sent back at pressures exceeding 100psi. When that hits the fluid in the reservoir it can cause extreme foaming aeration if not properly slowed down and directed. We have put some serious engineering time to the internal design to negate this entirely. We can't give away all of our secrets, but just know you won't have any aeration issues. Thats just 1 of the baffles, it doesn’t end there.

Go to any road race or drift event and look at all the factory (and most aftermarket) power steering reservoir. By the end of the day there is spillover all around the reservoir. It was our goal to be the 1 in 100 reservoirs to have no spillover from turbulence or overheating. The cap and cap bung in the reservoir itself are baffled together in such a way to completely block fluid while still providing passage for an air vent Power Steering Reservoirs need.

Hoses and Adapters
The high-pressure rack to pump hose is -6AN stainless steel, Teflon PTFE lined, and black PVC coated. This coating is crucial, it makes the hose resistant to chaffing if it routes against metal or a fellow hose. The -6AN rack to reservoir and -10AN reservoir to pump hoses are abrasion resistant, black nylon sheathed, and SS reinforced. They are all completed with high end black aluminum AN fittings.

Genuine Setrab Cooler
An optional GENUINE Setrab power steering oil cooler (13"x3"x2") is offered to those using this kit in harsh conditions. We offer this kit for many different engines. Use the dropdown menu to select the correct engine application for your chassis.

RHD and LHD options for:

1JZ-GTE (non VVT-i and VVT-i)
2JZ-GTE (non VVT-i and VVT-i)
GM LS | Vortec V8
VQ35DE & VQ35HR