350z HR Nissan OEM Key Fob Remote 07-08

1. Close and lock all doors with the driver's side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition cylinder a minimum of six times within 10 seconds. Your hazard lights will flash if you have performed this step successfully. Withdraw the key completely from the ignition cylinder each time. If this is performed too fast, the system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push any button on the keyless remote. Your hazard lights should flash. Do not press the button more than one time in this step. If the button is pressed more than one time, the programming procedure will not be successful.
5. If there are any remaining remotes (including the old ones), unlock then lock all doors using the driver's side power lock/unlock switch. Within 5 seconds, push any button on the next remote. Your hazard lights should flash. Repeat this step for each keyless remote (including any old/existing keyless remotes).
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver's side power lock/unlock switch, and open the driver's side door.