300zx Z32 Z1 Motorsport Ultimate VG30DETT Engine Rebuild Kit

Included in the kit.

Wiseco forged pistons with new rings
Complete Nissan Engine Gasket Kit
Full 60K Kit Timing Kit (Timing Belt Idler Pulleys Optional)
New Nissan oil pump
New Nissan Rod and Main Bearings (you are responsible for providing grades)
12 New Nissan Freeze Plug
4 Block Oil Galley Plugs
2 Block Deck Check Valves
6 New Fuel Rail to Plenum Seals
2 Half Moon Seals (Exhaust Valve Cover Seals)
1 Tube of Ultra Grey Silicone
Engine hard parts available if needed:

Valves
Valve Guides
Used Blocks
Heads
Cranks
This kit is for rebuilding your VG30DETT. If you plan on rebuilding your NA or require a custom bore size or compression ratio, please contact our Sales Department.

Please note: When Cometic Head Gaskets are selected you will receive .045" thick (stock thickness) gaskets appropriate for the bore size you selected.

Z1 recommends replacing the knock sensor harness with our Upgraded Knock Sensor Sub-Harness during any rebuild.

You must provide the specific grade numbers for the rod and main bearings in the comments section during checkout. If you do not provide the grade numbers in the comments section your order CANNOT ship.

If you choose the L19 option for head and main studs, you will receive L19 Head studs and standard ARP Main studs. L19 main studs are No Longer Available.

If you are unsure of what bearings you need, please send us an message.