Wilwood Disc Brake Proportioning Valve Metric

Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. This adjustment lets you fine tune the front to rear braking balance by proportionally decreasing the rear brake line pressure. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. This valve is available now with NPT (862) or metric(1130) fittings. This is not a direct replacement for the stock valve, will require re-routing brake lines to work on a Z or 510.
*800-862 includes adaptors to go from 1/8" NPT to 3/8-24 inverted flare inlet.

* 800-1130 has M10 X 1.0 bubble flare inlets