Ohlins Road & Track Porsche 997 Carrera 4/4S, Turbo/S, Targa/Cabrio (2006-2012)

Front:

- McPherson strut, upside down
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 20 mm lower than standard with recommended setup
- Height adjustment range -12/+15 mm
- Spring rate 70 N/mm
- Dustcovers
- Use with original top mounts

Rear:

- Conventional Shock Absorber
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 20 mm lower than standard with recommended setup
- Height adjustment range -10/+15 mm
- Spring rate 120 N/mm
- Dustcovers
- Use with original top mounts

Fits the following vehicles:

- Porsche 911 (997) Carrera 4/4S, Targa, Cabrio, year 2006 – 2011
        Type: 997
        Component certificate (TÜV approved)
        Manufacturers approval (Switzerland)
        GOCA (Belgium, Luxembourg)
- Porsche 911 (997) Turbo/S, Targa/Cabrio, year 2006 – 2012
        Type: 997
        Component certificate (TÜV approved)
        Manufacturers approval (Switzerland)
        GOCA (Belgium, Luxembourg)

Notes:

If the car is equipped with the BOSE loud speaker system you will need an extenting wire for the damping adjuster. The following part numbers are needed: 24631-01 (1 pcs/side), 24632-02 (1 pcs/side), 24633-01 (1 pcs/side) and 24633-02 (1 pcs/side).

For the POZ MN05 a PASM cancellation kit with is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.

Cancell. Kit except Cabrio:35020-10
Cancell. Kit only Cabrio: 35020-09