General Features:
- TTX technology
- 2-way adjustable
- Height adjustable
- Rebuildable
- Corrosion salt spray tested (ISO 9227)
- 2 year limited warranty
Front:
- McPherson strut, upside down
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 20 mm lower than standard with recommended setup
- Height adjustment range -15/+15 mm
- Spring rate 60 N/mm
- Dustcovers
- Use with original top mounts
Rear:
- Conventional Shock Absorber
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 20 mm lower than standard with recommended setup
- Height adjustment range -8/+15 mm
- Spring rate 120 N/mm
- Dustcovers
- Use with original top mounts
Fits the following vehicles:
- Porsche 911 (997) Carrera 2, year 2004 – 2012
Type: 997
Variants: C1, K1, außer/except CS11, CT11, CU11
EG TA: e13*2001/116*0137*00 -, e13*2001/116*0137*16
Component certificate (TÜV approved)
Manufacturers approval (Switzerland)
GOCA (Belgium, Luxembourg
Notes:
If the car is equipped with the BOSE loud speaker system you will need an extenting wire for the damping adjuster. The following part numbers are needed: 24631-01 (1 pcs/side), 24632-02 (1 pcs/side), 24633-01 (1 pcs/side) and 24633-02 (1 pcs/side).
For the POS MI20 a PASM cancellation kit with is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.
Cancell. Kit except Cabrio:35020-10
Cancell. Kit only Cabrio: 35020-09
Rating: | |
Name: | |
Text: | |
Add review |