General Features:
- DFV technology (Dual Flow Valve)
- Height adjustable
- Rebuildable
- Corrosion salt spray tested (ISO 9227)
- 2 year limited warranty
- Kit incl. springs
Front:
- McPherson strut, upside down
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 10 mm lower than standard with recommended setup
- Heigth adjustment range +15/-15 mm
- Dustcovers
- Use with original top mounts
Rear:
- Conventional Shock Absorber
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approx. 10 mm lower than standard with recommended setup
- Heigth adjustment range +15/-15 mm
- Dustcovers
- Use with original top mounts
Fits the following vehicles:
- BMW M3, M4 (F80, F82), year 2014 –
- Manufacturers approval (Switzerland)
Notes:
The coil over set will be delivered without springs. Coil springs need to be ordered separate. Recommended springs are:
* Front: spring rate 90 N/mm, Öhlins article no. 48010-27
* Rear: spring rate 230 N/mm, Öhlins article no. 48020-83
This suspension can be ordered as a complete kit including springs with article no. BMS GMP40.
For the BMS MP40 a EDC cancellation kit with the article no 35020-02 is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.
Rating: | |
Name: | |
Text: | |
Add review |