M&M Honda CIVIC FD2 rear pillow upper mount 10φ

Due to the structural configuration and shape of the rear suspension, which is the biggest weakness, the rear suspension is unstable due to the lack of body rigidity. The same goes for the FD2, FN2, FIT, CR-Z, etc., but the basic design is the same as a minivan in order to have a spacious interior, so this can only be said to be inadequate for sports driving and circuit driving. With the genuine rubber bush mount, each time the damper strokes, the rubber bush twists, twists, and distorts back and forth, left and right, and up and down, stopping the initial movement of the damper and causing it to move slowly. As a result, the rear of the vehicle seems to be jumping up and down, making you feel restless and uncomfortable. The reason for this is that the rear damper is only fixed to the vehicle body at one point, the rubber bush on the genuine upper mount. Therefore, the genuine rubber bush mount moves up and down, left and right every time the damper strokes, making the initial movement slow and stopping the damper stroke. The result is a negative impact on initial braking. Strengthening the suspension or increasing the spring rate will worsen the symptoms. This rear pillow upper mount allows you to directly feel the initial movement of the damper by replacing the rubber bushing that carries the most stress with a pillow mount, and you can also feel the rebump movement of the bumps on the left and right sides of the damper. By additionally attaching a special rear tower bar to the pillow mount body, it is possible to achieve even stronger body rigidity in the rear suspension area. This is because the pillow mount is firmly fixed to the body, allowing the tower bar to fully demonstrate its performance. These two parts also make a major contribution to ride comfort. By increasing body rigidity and directing the movement of the damper, the initial movement of the genuine damper moves smoothly, eliminating the unpleasant upward feeling and improving ride comfort. The way to greatly improve this weakness is by using the rear pillow upper mount and rear tower bar.

■■Note! There are two sizes of rear pillow upper mount: φ10 and φ12mm. Please check the shaft diameter before purchasing. If you are unsure, please contact us in advance.