M&M Honda CIVIC FD2 reinforced clutch pedal

Due to insufficient strength of the bracket at the clutch pedal attachment point, if you continue to use it for many years, you will hear a squeaking sound every time you press the clutch. In addition, the genuine clutch pedal frame cannot withstand the lack of strength due to the installation of a reinforced clutch cover and disc, making it possible to operate the clutch through hard shift changes even in circuit driving, where quick clutch engagement and delicate clutch work are required. The bracket itself may not be able to withstand the excessive load and the weak points of the bracket may become distorted, which may eventually lead to cracks. In this reinforced clutch pedal, the bracket body is reinforced using 3-dimensionally molded 2mm thick steel material, and each part is welded to maintain the strength to withstand the weight of the reinforced clutch and rough clutch work. The reinforced clutch pedal has a reinforced frame, so it won't feel heavy to the touch. By replacing the unreliable and fluffy clutch work with a reinforced clutch pedal, you can easily tell when the clutch is engaged, and the clutch engagement can be performed smoothly and easily with a very good feel.

Note! If the master cylinder is defective, the sound coming from the master cylinder will not go away unless the master cylinder is replaced. When you replace a reinforced clutch pedal, the clutch pedal frame is strengthened, so the part that was letting the sound escape due to weakness or distortion in the frame is removed, and the sound may be directly reflected and become louder. In that case, please replace the master cylinder immediately. To install, remove the genuine clutch pedal body and replace it with the reinforced clutch pedal. The bushing pedal pin has also been strengthened and incorporated into the reinforced clutch pedal. The red part of the image is the enhanced part. The product is not painted red.