M&M Honda CIVIC FD2 Carbon Bonnet Ducted Twill Carbon/Seibon

■As a characteristic of carbon material, it may discolor due to ultraviolet rays. We recommend applying UV-cut clear coating to prevent discoloration as much as possible.

Bonnet made by SEIBON! A twill weave carbon bonnet with a function-oriented layout with two intake ducts on the left and right in the center of the carbon bonnet! Reinforcement is applied to the back side to prevent deformation of the bonnet. It is both lightweight and strong, weighing only 5.5kg compared to the original weight of 10kg. In addition, the back of the duct is structured to prevent water from entering, so an inner protector is not required. Carbon bonnet type S uses a carbon fiber material on the front and FRP material on the back. The back side is also reinforced and has air duct drainage holes. In consideration of safety, when driving on the street, you can use the genuine striker without worry even without the bonnet pin. However, when doing sports driving such as circuit driving, the bonnet lock may come off due to wind pressure due to the lightweight bonnet, so we recommend using a bonnet pin for safety reasons. We recommend applying a UV-cut clear coating to the carbon bonnet to maintain its luster for a long time.