M&M Honda CIVIC FD2 Carbon GT Wing Type 01BJ 1440mm with bolt-on bracket

■The height of the wing is approximately 150mm higher than the height of the wing stay. ■Discoloration of carbon materials can be further suppressed by applying UV clear coating. ■Please note that carbon materials are easily discolored by ultraviolet rays and heat.

The carbon GT wing 01BJ has a wing width of 1,440mm, which is suitable for vehicle inspection, and it comes with a special bracket that can be installed using the genuine wing removal hole, so it is a bolt-on type that does not require drilling. The wing end plates are 01 type 3DGT carbon wings. Wing heights can be selected from 5 sizes up to 135,165,195,225,245.

M&M GT Wing is a custom-made setting.

Please let us know the height of the wing at the time of purchase.

■■ Carbon GT Wing type 01BJ specifications ■■

□Wing width: 1440 mmm vehicle inspection compatible width

□Wing height 135,165,195,225,245mm (wing stay length) free selection

□Wing end plate shape type 01 setting

□Wing shape Single 3D design, left and right wing end plate attachment type

□How to install the wing: Comes with a wing bracket that uses the holes in the genuine wing.

□Wing material wet carbon

The carbon material uses wet carbon, and the wing stay uses aluminum material. Equipped with angle adjustment function and front/rear step adjustment, the bracket material is dry carbon in pursuit of both design and strength. The average weight of the wing is approximately 4Kg, and the height of the aluminum wing stay can be selected from 135, 165, 195, 225, and 245mm. This is the height of the aluminum wing stay, so it is not the height to the wing. The height of the wing center will be approximately 150mm higher. Wing height and angle can be adjusted. To install the wings, use the holes where the genuine wings were removed on both sides of the trunk and fasten them with the included brackets.

■The vehicle inspection compatible dimension width of Type 01BJ is 1,440mm.

■The non-compatible dimension width of type 01BF is 1,500mm.

■The vehicle inspection compatible dimension width of Type 02BJ is 1,440mm.

■The non-compatible dimension width of type 02BF is 1,500mm.

■There are two types of wing end plate shapes: 01 type and 02 type.