Specifications/Notes: ■Special bracket type that uses the genuine wing holes to fasten. ■The height of the wing stay can be freely selected from 135, 165, 195, 225, and 245mm. ■Do not lift or close the trunk by holding the wing directly.
■The height of the wing is approximately 150mm higher than the height of the wing stay. ■Discoloration of carbon materials can be further suppressed by applying UV clear coating. ■Please note that carbon materials are easily discolored by ultraviolet rays and heat.
The carbon GT wing MRBJ has a wing width of 1,430mm, which is suitable for vehicle inspection, and it comes with a special bracket that can be installed using the removal hole of the genuine wing, so it is a bolt-on type that does not require drilling. Wing design with integrated wing end plate. Wing heights can be selected from 5 sizes up to 135,165,195,225,245.
M&M GT Wing is a custom-made setting.
Please let us know the height of the wing at the time of purchase.
■■ Carbon GT Wing type MRBJ specifications ■■
□Wing width: 1430 mmm vehicle inspection compatible width
□Wing height 135,165,195,225,245mm (wing stay length) free selection
□Shape of wing end plate Integrated wing design
□Wing shape Single 3D design, integrated wing end plate
□How to install the wing: Comes with a wing bracket that uses the holes in the genuine wing.
□Wing material wet carbon
The carbon material is wet carbon, and the wing stay is made of aluminum. Equipped with angle adjustment function and front/rear step adjustment, the bracket material is dry carbon in pursuit of both design and strength. The average weight of the wing is approximately 4Kg, and the height of the aluminum wing stay can be selected from 135, 165, 195, 225, and 245mm. This is the height of the aluminum wing stay, so it is not the height to the wing. The height of the wing center will be approximately 150mm higher. Wing height and angle can be adjusted. To install the wings, use the holes where the genuine wings were removed on both sides of the trunk and fasten them with the included brackets.
■The vehicle inspection compatible dimension width of type MRBJ is 1,430mm.
■The non-compatible dimension of type MRBF is 1,480mm.
Rating: | |
Name: | |
Text: | |
Add review |