GReddy 09+ Nissan GTR RX Intake Manifold Plenum

The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most from larger turbochargers at higher boost levels, a smooth flowing GReddy Intake manifold is a must.

Car Make: Nissan

Type: GTR

Car Year: 2009-on

Notes:

(R35) VR38DETT

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Cast Aluminum high-flow intake Manifold for VR engine

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

* factory thorttle body compatiable. or ** RX Billet Throttle Kit.

Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*also see our 2nd Variation with optional Sub-Injector provisions. p/n 13522331

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

**This product is illegal to be driven on public roads in the USA.