FDF RaceShop Nissan/Infiniti 350Z/G35 Mega Mantis Angle Kit - Custom Colour

And here's why:

-Angle, 70 degrees depending on your steering rack/offset rack setup

-Ackerman, adjustable Ackerman

-Roll Center, optimized handling by adding 40mm of roll center correction

-Bump steer, minimal bump steer in drift by perfecting tie-rod pickup location

-Caster, displaced caster built into the knuckle for optimal alignment force

-Camber, optimized camber ranging from adjustable from -3 to -6

-Track Width, 50-75mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout  suspension travel for increased grip

-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable

-Weight Reduction, compact knuckle design makes for a lightweight and strong design, scissor frame constructed alloy steel arms, 7075 aluminum used where possible

*Must Have Coilovers To Run This Kit*

The kit includes everything you need to install

-2 lower control arms w/ compression arms

-2 upper control arms

-2 knuckles

-Ackerman Plates

- 2 inner and outer tie-rods

-All bearings and hardware required for install

For custom colors, email your order number and the color wanted.