Eventuri Carbon Intake System Black Audi F3 RSQ3 2019+

Each component has been designed to provide the turbo with a smooth and free flowing path. The intake tube has an internal diameter of 103mm or just over 4" and has a smooth curvature from the filter housing all the way to the turbo inlet.

The filter itself has been specifically designed for this intake and has a huge outer diameter of 210mm or 8.3" with a filtration surface area of over 130,000mm 2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the RSQ3 engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. We have lifted the front of the duct to now provide an extra opening behind the hood which is equivalent to an extra 7 diameter hole for the intake to draw from. The resulting system has the capability of flowing 840 CFM at 28" H2O while keeping intake temperatures at a minimum with the sealed design.

The gains are from a combination of reasons:

The sealed system keeps IATs low the RS3 engine bay can get heat soaked very quickly so an open cone filter will cause an increase in IAT values resulting in a loss of performance.
The Venturi housing provides a smooth transition from the filter to the intake tubes which are both matched to an internal diameter of 103mm. This helps the hybrid and full frame turbo setups to run more efficiently.
The entire system is constructed from pure pre-preg carbon fibre which is great at insulating from heat and has smooth internal surfaces as opposed to fibreglass which will have sharp resin lines present.