Dinan Camber Plates for BMW F2x M235i M240i 228i 230i F3x 320i 328i 330i 335i 340i 428i 430i 435i 440i

APPLIED MODELS:

    ▪ M235i & xDrive F22 Coupe 2014-2016
    ▪ M235i & xDrive F23 Convertible 2015-2016
    ▪ 228i & xDrive F22 Coupe 2014-2016
    ▪ 228i & xDrive F23 Convertible 2015-2016
    ▪ 320i & xDrive F30 Sedan 2013-2018
    ▪ 328i & xDrive F30 Sedan 2012-2016
    ▪ 328i xDrive F31 Wagon 2014-2016
    ▪ 328i xDrive F34 GT 2014-2016
    ▪ 335i & xDrive F30 Sedan 2012-2015
    ▪ 335i xDrive F34 GT 2014-2016
    ▪ 340i & xDrive F30 Sedan 2016-2018
    ▪ 428i & xDrive F32 Coupe 2014-2016
    ▪ 428i & xDrive F33 Convertible 2014-2016
    ▪ 428i & xDrive F36 Gran Coupe 2014-2016
    ▪ 435i & xDrive F32 Coupe 2014-2016
    ▪ 435i & xDrive F33 Convertible 2014-2016
    ▪ 435i & xDrive F36 Gran Coupe 2014-2016
    ▪ 230i & xDrive F22 Coupe 2017-2018
    ▪ 230i & xDrive F23 Convertible 2017-2018
    ▪ M240i & xDrive F22 Coupe 2017-2018
    ▪ M240i & xDrive F23 Convertible 2017-2018
    ▪ 330i xDrive F31 Wagon 2017-2018
    ▪ 330i & xDrive F30 Sedan 2017-2018
    ▪ 330i xDrive F34 GT 2017-2018
    ▪ 340i xDrive F34 GT 2017-2018
    ▪ 430i & xDrive F32 Coupe 2017-2018
    ▪ 430i & xDrive F33 Convertible 2017-2018
    ▪ 430i & xDrive F36 Gran Coupe 2017-2018
    ▪ 440i & xDrive F32 Coupe 2017-2018
    ▪ 440i & xDrive F33 Convertible 2017-2018
    ▪ 440i & xDrive F36 Gran Coupe 2017-2018

Special Note: Warranty applies to all parts except for the spherical bearings.

Dinan's F2x / F3x Camber Plates allow an impressive 43mm of total camber adjustment (30 negative, 13 positive) providing for a more aggressive negative camber setting that dramatically improves grip in the turns for reduced understeer and razor sharp turn-in. The positive adjustment range on the camber plates is unique to Dinan and allows the end user, if desired, to retain OEM camber settings on a lowered car or to combat excessive negative camber brought upon by springs that aggressively lower the car. Not only do the Dinan camber plates provide a wide range of adjustment but they also have ride quality in mind like all of Dinan's suspension components and are designed to properly retain the bumpstop so that it compresses as designed from the factory. There is no reason for camber plates to wildly inhibit ride quality if engineered properly. Dinan camber plates are also built to take a beating and are the only ones that utilize a steel alloy mount plate that will resist deforming from pot holes on the street or curb hopping at the track.

Aggressive drivers will benefit from reduced outside edge tire wear as well.

Please note there is a possible increase in road noise with the use of the Dinan F2x / F3x camber plate kit.

Benefits of the F2x / F3x Camber Plate Kit:

+ 43mm of total camber adjustment (30 negative, 13 positive from OEM). This translates to 2.5 degrees of negative camber and just over a degree of positive camber being possible.
+ Decreased understeer
+ Decreases outside edge tire wear
+ Steel alloy mount plate and not aluminum
+ Fits with factory strut tower weather seal