Connector is available as: - Pigtail - assembled with 3 inch of wire- Housing - Only plastic housing- Parts - disassembled and comes with housing, wire terminals and wire seals.
This connector is used for the camshaft position sensors on the RevUp VQ35DE as well as the oil pressure sending unit for all VQ35DEs.
Quality Cam Sensor Connectors from Wiring Specialties. Available in Green and Black.
Quality Cam Sensor Connectors from Wiring Specialties. Available in Green and Black.
Connector is available as: - Pigtail - assembled with 3 inch of wire- Housing - Only plastic housing- Parts - disassembled and comes with housing, wire terminals and wire seals.
3.5 bar map or 50 PSIA sensor kit. Stainless steel sensor body with 1/8-NPT male thread. Includes -4 adapter, barb adapter, connector plug with flying lead & sensor.
OEM replacement oil pressure sending unit for the 350Z. When these go out oil pressure will no longer be displayed or will be inaccurate.
Factory OEM thermostats open at 76.5 degrees celsius (169.7F) but Nismo's thermostats open at a much sooner rate at 62 degrees celsius (143.6F). Giving you better cooling...
Genuine Nissan replacement A/C refrigerant pressure sensor switch for the 350z, 370z and R35.
Mass Airflow Pigtail MAF Harness.
Air Fuel Ratio Sensor by Denso®. Position: Upstream. Make sure your engine runs efficiently and produces fewer emissions by replacing your malfunctioning fuel-ratio sensors with...
Air Fuel Ratio Sensor by Denso®. Position: Upstream. Make sure your engine runs efficiently and produces fewer emissions by replacing your malfunctioning fuel-ratio sensors with...
Spacer-idler Pulley Part replaced by: 11931-AL50A
The World Power Systems High Output Alternator is a great solution to those whose power demands have exceeded the stock 110 amp alternator. These alternators are brand new and...
THROTTLE POSITION SWITCH is Lookup Code 22620 in the diagram.
B5567-CF42A this was superseeded to B5567-CF42E.
Wiring Specialties Halogen Headlight Connector with Pigtails, 6 Pin Male.
This connector is used for the camshaft position sensors on the RevUp VQ35DE as well as the oil pressure sending unit for all VQ35DEs.