Nissan OEM Upper Intake Plenum Collector.
This is the RH (Driver) Side intake tube for the VQ35HR Engine. New clamps are included with.
This is the LH (Passenger) Side intake tube for the VQ35HR Engine. New clamps are included with.
These 350Z intake hoses replace the original G35 intake hose. Submitting smoother air flow, you will experience a 4-6HP increase. This setup works perfectly with the JWT Pop...
This is the JWT Velocity Stack included with JWT Pop Chargers. This bolts to the MAF sensor and provides a mounting point for the filter element.
These are the Heat Shields for the JWT Intake Pop Charger Kit, which fits a 07-08 350Z VQ35HR, includes all hardware and seals.
Smooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement...
This is a replacement hardware kit for the Kinetix Velocity Manifold.
Nissan OEM Lower to Upper Intake Manifold Stud - 07-08 350Z Z33. SCREW is Lookup Code 17201W in the diagram.
These Plugs are only used when upgrading to the EPS PCV Kit on a Stock Intake or Upgraded Silicone Intake hoses. Sold Individually, 2 Required Per Vehicle.
The CZP VQ35DE open breather kit replaces the OEM positive crankcase ventilation or PCV systemThis kit stops oil consumption through the intake tract as well as the resulting...
The CZP VQ37VHR open breather kit replaces the OEM positive crankcase ventilation or PCV systemThis kit stops oil consumption through the intake tract as well as the resulting...
Fits models: 300ZX / 350Z / 370Z / 2009-2015 Nissan Maxima... (1) 4 ply reinforced high quality silicone coupler. 3 inch inside diameter, and 3 inches long "Hump". Available in...
K&N Recharger Kit 99-5050 is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced. The kit comes with K&N Power Kleen air filter...
These are the heat shields and hardware that come with the JWT Pop Chargers.
Pop Charger filter oil blue 12.03 spray. Used to re-oil your JWT Pop Charger air filter. Can be used on any JWT Pop Charger, gives a blue tint.
Air Intake Hose Kit (MMHOSE-370Z-09AIBK) by Mishimoto®. Includes: 2 Silicone Air Intake Hoses, 4 3" T-Bolt Clamps, Installation Instructions. Inner Diameter: 2.70". Outer...
Air Intake Hose Kit (MMHOSE-370Z-09AIRD) by Mishimoto®. Includes: 2 Silicone Air Intake Hoses, 4 3" T-Bolt Clamps, Installation Instructions. Inner Diameter: 2.70". Outer...