Specifications/Notes: ■Note: Intake air pipe KIT is required separately. The length of the air funnel is 33mm for K type engine CL7 FD2 FN2 EP3 DC5. S2000, DC2, and EK9 can...
Specifications/Notes: Big rotor compatible with genuine calipers. A 2-piece big rotor exclusively for genuine calipers that uses a big rotor with 6 slits and a rotor size of 313...
Specifications/Notes: Big rotor compatible with genuine calipers. A 2-piece big rotor exclusively for genuine calipers that uses a big rotor with 6 slits and a rotor size of 313...
Specifications/Notes: This is a 2-piece rotor genuine replacement type with 6 slits of rotor size/320mm. We recommend using the 2-piece big rotor KIT for the rear. Bell hat...
Specifications/Notes: It will not work with the genuine ECU. Requires a dedicated computer. ECU setting is required. Immobilizer, air conditioner, idling etc. work normally....
Specifications/Notes: After installation, alignment adjustment is required. Although it is compatible with 18 inches, a spacer may be required depending on the genuine wheel or...
Specifications/Notes: Please note that prices are subject to change as this is a genuine part. The price includes labor, so we will only be able to accommodate you when you come...
Specifications/Notes: FlashPro is a tool-only price. Please contact us as there will be an additional charge for data installation.
This is a genuine replacement type sports cleaner. It is more effective when used in conjunction with the Super Carbon Air BOX, blocking hot air in the engine room and greatly...
Specifications/Notes: Remove and install the genuine sound muffler (resonator chamber). We also recommend replacing the Super Carbon Air BOX at the same time. If foreign matter...
Specifications/Notes: By eliminating all sound-muffling fins and increasing efficiency so as not to obstruct air flow, the flow rate and velocity are 20% higher than the stock...
Specifications/Notes: The valve opening temperature has been lowered from the stock 78°C to 68°C.
Specifications/Notes: Intake gasket made of 3mm thick Bakelite heat-resistant resin material. You can expect a 3-5% increase in power due to the reduction in intake temperature!...
Specifications/Notes: Handmade special head tuning. Manufactured from the customer's actual engine head. Engine removal and removal costs are not included.
Specifications/Notes: This is a high-performance 2400cc tuned engine that uses forged high compression pistons, I-section forged connecting rods, and a 2400cc-specific crankshaft.
Applicable model: FD2, Mugen RR, FN2, EP3, CL7, DC5
Applicable model: FD2, Mugen RR, FN2, EP3, CL7, DC5
Applicable model: FD2 Mugen RRSpecifications/Notes: A special tool for shift wire rigid collars.
Applicable model: FD2 Mugen RRSpecifications/Notes: For replacement, please use the special tool sold separately. *Due to individual differences, it may be difficult to enter...
Applicable model: FD2 Mugen RRSpecifications/Notes: To install, remove the genuine clutch pedal body and replace it with the reinforced clutch pedal.
Applicable model: FD2 Mugen RRSpecifications/Notes: A pillow upper mount is required to install the tower bar.
Applicable model:FD2 Mugen RRSpecifications/Notes:There are two sizes of rear pillow upper mount: φ10 and φ12mm.
Applicable model: FD2 Mugen RRSpecifications/Notes: There are two sizes of rear pillow upper mount: φ10 and φ12mm.
Applicable model: FD2 Mugen RRSpecifications/Notes: Number of parts (left and right set) Mount diameter: 65φ Mount thickness: 8mm x 2 Spacer thickness: 10mm x 2 5mm x 4 3mm...