New OEM Genuine Nissan front pinion bearing for the R180 differential. There are three bearings on the pinion gear and this is the front taper bearing (not the very front ball...
R180 bearing and seal rebuild kit with. Choose from kits made up of OEM or aftermarket bearings.
R180 bearing and seal rebuild kit with. Choose from kits made up of OEM or aftermarket bearings.
OEM genuine Nissan R200 axle seal. This seal will fit right or left side axles on R200's found in Datsun 280z and 280ZX.
OEM Genuine Nissan R200 axle bearing. Will fit right or left axle. This bearing works in R200 differentials found in Datsun 280Z and 280ZX.
New OEM genuine Nissan R200 cover bolt. Eight bolts required for the cover. Size M8. 25mm under head length.
New OEM genuine Nissan R200 cover bolt. Eight bolts required for the cover. Size M8. 25mm under head length.
New OEM Nissan 8mm bolt with washer. Choose from 20mm or 25mm length. 885= 25mm 1025= 20mm
New OEM genuine Nissan side O-ring for the R180 and R160 differential. One O-ring per axle of the diff. Fits R180 rear ends found in Datsun 240Z, 260Z and 280Z, 1970-78 and R160...
Rear axle bearing spacer for Datsun 510 wagon with solid rear axle.
New OEM mounting stud for R180 differential cover. This is an M12 stud that has 1.25 thread pitch on one end and 1.75 thread pitch on the other. Will also work on Subaru R180...
Ford 8.8 explorer differential axle seal. This seal fits Explorer 8.8 IRS diffs only.
New OEM genuine Nissan rear axle seal for Datsun 510 1968-73 and 280ZX 1979-83. This fits on the inner side of the outer axle, one seal per axle. For IRS driveline. See #50 in...
Thread repair die for the outer axles on Datsun 240Z, 260Z and 280Z, 1970-78. It is common when removing the axle nut to do light damage to the threads. This die will straighten...
Thread repair die for the outer axles on Datsun 240Z, 260Z and 280Z, 1970-78. It is common when removing the axle nut to do light damage to the threads. This die will straighten...
Rear axle seal for Datsun 510 sedan and wagon, 1968-73.
Rear wheel bearing for Datsun 510 sedan inner and outer (68-73) and 280ZX inner only (79-83). Will fit right or left side. Choose from USA or China made. *PT# 800-1639=...
Rear wheel bearing for Datsun 510 sedan inner and outer (68-73) and 280ZX inner only (79-83). Will fit right or left side. Choose from USA or China made. *PT# 800-1639=...
Rear axle seal for Datsun 510 (68-73) and 280ZX (79-83). This seal is on the outboard stub axle, inner seal. Will fit right or left side. Number 41 in diagram.
New OEM genuine Nissan rear outer axle lock nut. This nut will fit Datsun 240Z, 260Z, 280Z, 280ZX and 510 1970-83. This nut will most likely need to be replaced if you are...
Axle nut for the rear outer axle. M22-1.5 thread. Fits some aftermarket axles. Not an OEM size.
Axle nut for the rear outer axle. M22-1.5 thread. Fits some aftermarket axles. Not an OEM size.
OEM genuine Nissan rear axle flange nut. This nut is a special size and is used on the differential axle to driveshaft axle flange. The nut is extra short to fit in the tight...
OEM genuine Nissan rear axle flange nut. This nut is a special size and is used on the differential axle to driveshaft axle flange. The nut is extra short to fit in the tight...