New reproduction front tow hook made out of stainless steel. This tow hook is modeled after the original right front tow hook found on the 240Z. Fits in the stock mounting...
Bolt kit for installing the spacers for the front toyota brake caliper upgrade. The spacer for the 240Z is different from the 260Z/280Z so it requires a different length bolt.
Bolt kit for installing the spacers for the front toyota brake caliper upgrade. The spacer for the 240Z is different from the 260Z/280Z so it requires a different length bolt.
Bolt kit for installing the spacers for the front toyota brake caliper upgrade. The spacer for the 240Z is different from the 260Z/280Z so it requires a different length bolt.
Bolt kit for installing the spacers for the front toyota brake caliper upgrade. The spacer for the 240Z is different from the 260Z/280Z so it requires a different length bolt.
Brake caliper hardware kit for Toyota brake upgrade calipers when using stock S30 front rotors. This kit will work with our 400-109/110 calipers.
Remanufactured 4-piston front brake caliper. This is the Toyota upgrade caliper that is larger than the stock Datsun caliper. This caliper is a direct bolt on to Datsun 240Z,...
Remanufactured 4-piston front brake caliper. This is the Toyota upgrade caliper that is larger than the stock Datsun caliper. This caliper is a direct bolt on to Datsun 240Z,...
Piar of Toyota front brake caliper for upgrading stock Datsun 240Z, 260Z and 280Z brakes. S12-8 calipers for use with stock solid rotors. These are new/reman calipers but...
Toyota front brake caliper for upgrading stock Datsun 240Z, 260Z and 280Z brakes. There are two types of Toyota calipers, for vented and non-vented rotors. These calipers are...
Toyota front brake caliper for upgrading stock Datsun 240Z, 260Z and 280Z brakes. There are two types of Toyota calipers, for vented and non-vented rotors. These calipers are...
Toyota 4-piston front brake caliper upgrade for Datsun 240Z, 260z and 280Z, 1970-78. This caliper will bolt up in the stock location and will require a spacer to work with the...
Toyota 4-piston front brake caliper upgrade for Datsun 240Z, 260z and 280Z, 1970-78. This caliper will bolt up in the stock location and will require a spacer to work with the...
Sport slotted and vented front brake rotors for use with Toyota brake calipers on Datsun 240Z, 260Z and 280Z, 1970-78. These are the wider vented rotors that can be used with...
Sport slotted and vented front brake rotors for use with Toyota brake calipers on Datsun 240Z, 260Z and 280Z, 1970-78. These are the wider vented rotors that can be used with...
TPS sensor adaptor for Datsun 280Z and 280ZX throttle bodies. This adaptor will allow the use of a new style Chevrolet TPS on your stock 280Z throttle body. The new sensor is a...
New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.
New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.
New TPS sensor for Datsun 280Z and 280ZX 1975-83. Uses 3-pin square connector. *Note this is the thinner switch. We have seen thick and thin switches on 1975-83 cars. If your...
New TPS sensor for Nissan 300ZX 1984-89 and 200SX 1986-88.
New throttle position sensor (TPS) connector with wiring. This connector will fit 1975-95 Datsun 280Z, 280ZX and 300ZX . This connects right to your stock TPS & will require...
New throttle position sensor (TPS) connector with wiring. This connector will fit 1975-95 Datsun 280Z, 280ZX and 300ZX . This connects right to your stock TPS & will require...
Extension housing bearing for Datsun 5-speed transmission with 72mm O.D. bearing. Not for Turbo (T5) 5-speed. Bore=1.378", Outer Diameter=2.8346", Width=0.6693" InfoNissan...
NEW OEM genuine Nissan 5- speed (FS5W71B) transmission bearing. Manual calls this bearing "counter, over drive shaft bearing". See picture for location. 47mm O.D., 20mm I.D.