Improve your braking and fill in the gap of the small stock brake kit. This upgrade lets you use your stock calipers with larger 12.75inch 350Z Track Model Rotors. Larger brake...
Improve your braking and fill in the gap of the small stock brake kit. This upgrade lets you use your stock calipers with larger 12.75inch 350Z Track Model Rotors. Larger brake...
The OEM plastic coated latch catchers that the Z32 Convertible top hooks all crack and are slowly breaking with age. Without these latch catches, the top has nothing to lock...
These o-rings fit between the 2 halves of your Z32 calipers to seal the internal fluid passages. They are not available from Nissan and previously could only be found used....
These o-rings fit between the 2 halves of your Z32 calipers to seal the internal fluid passages. They are not available from Nissan and previously could only be found used....
These o-rings fit between the 2 halves of your Z32 calipers to seal the internal fluid passages. They are not available from Nissan and previously could only be found used....
Left Hand Drive Brake Brace. This kit braces the brake master cylinder so that it cannot move forward under braking. Brake feel will greatly improve as the master cylinder will...
We remade the OEM Nissan shock mount gaskets using a higher quality material that is thicker, less prone to shrinkage and features an anti stick coating so maintenance is a breeze.
CZP Headlight Connector w/ Pigtails H4 JDM Model, Female - Nissan 300ZX Z32.
This fitting will allow the removal of the solenoid and eliminates the fluid from travelling through the hicas lines to the back! Compatable with all the Hicas Elimination Bars....
No more wiring nightmares with 1999 JDM Bumper Corner Lights. This connector plugs straight into the 1999 JDM Corner Light and can easily be spliced into the original wiring...
As these have become increasingly difficult to obtain from Nissan, we have began producing our own replicas of the original springs. These are the exact same spring rate,...
This kit gets you a complete set of lines to freshen up your Z32's power steering system! It's the perfect mixture of OEM and aftermarket parts to keep things affordable, while...
These ball joints are press fit into the front lower control arms, they cannot be bought from Nissan unless you purchase the whole arm. Over years of use and aging the boots...
This kit replaces two of the Z32 plenum bolts with studs for easy alignment of the gasket and plenum. The upper-to-lower plenum gasket is notoriously difficult to keep lined up...
2 Required Per Vehicle.
1 Required Per Vehicle
These are direct plug and play in connectors for the 1999 Nissan JDM Xenon Headlights. 1 required per headlight, 2 required per vehicle.
These custom adapter brackets were made to work with the Stoptech ST-41 Calipers using 355mm 14" Rear Rotors.
We remade the OEM Nissan shock mount gaskets using a higher quality material that is thicker, less prone to shrinkage and features an anti stick coating so maintenance is a breeze.
This is a Complete High Quality Rack and Pinion Assembly. This part is NOT used or stripped from a junk yard. It has been completely disassembled and cleaned with new bushings,...
CZP Molded Silicone Hoses feature are a direct replacement for stock OEM hoses. This is the return hose located on the LH(Driver) side of the High Pressure Power Steering Hose....
CZP Molded Silicone Hoses feature are a direct replacement for stock OEM hoses. The power steering return hose is attached to the reservoir and the return hard line coming off...