These bolts are used to mount the clutch pressure plate to the flywheel. 9 are required for the entire pressure plate. Product # 30223-JA00AReplaces # 30223-07S00
These are the replacement clutch pressure plate washers. 9 are required for the entire pressure plate.
Product #30417-JK21AReplaces # 30417-JK20A
When replacing the slave cylinder, we highly recommend replacing the master cylinder at the same time. Contaminants in the fluid often cause the masters to fail at or near the...
Nissan OEM Concentric Slave Tube 07-08.
Nissan OEM Clutch Line Hose Bracket - Nissan 350Z 370Z / Infiniti G35 G37.
Product # 31377-CD00AReplaces # 31377-CD000
Nissan OEM Transmission Bolt, 65mm.
Nissan OEM Transmission Drain or Filler / Differential Filler Plug. Product # 32103-1MG0BReplaces # 32103-4N21A, 32103-4N211
Nissan OEM Front Transmission Input Flange Cover Oil Seal.
This is the seal located at the rear of the transmission, where the drive shaft slides into.
The original pilot bushing is just a metal sleeve that the transmission input shaft slides into. These sleeves usually get worn out, and leave shavings inside the bell housing....
These bushings are located at end of crank shaft where the Transmission input shaft slides into. They will wear out over time, would be good to replace them every 120K. Product...
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
OEM Nissan Stub Axle Retainer for your Nissan / Infiniti. These clips are attached on the inside of the stub axle and hold the stub axle in the differential.
OEM Nissan Fork-shift,1st & 2nd for 350z & 370.
Product # 32815-CD70AReplaces # 32815-CD010
Nissan OEM 350Z Transmission Shifter Guide Lock-Out Plate - 03-06. Product # 32822-AC80AReplaces # 32822-AC800
Nissan OEM Check Hydraulic Unit Ball.