P2M aluminum offset tension rods were built to allow extreme wheel angle clearance. For extreme drifters with extreme steering angles the wheel and tire might get in conflict by...
Z32 direct factory replacement. Also drilled with 4 / 5 lug pattern for S13/S14 front brake conversion.
Z32 direct factory replacement. Also drilled with 4 / 5 lug pattern for S13/S14 front brake conversion.
Z32 direct factory replacement. Also drilled with 4 / 5 lug pattern for S13/S14 front brake conversion.
P2M S13 RLCA is made from S45C high strength alloy for strength and rigidity. The purpose is to replace the OEM arms by removing the soft rubber bushings that are most likely...
300zx Z32 P2M P2-TTHNZ32S-KM Turbo Timer Harness - Nissan - [Works for Greddy, Apexi, Blitz, major JDM turbo timers].
Fits both 300ZX Rears as well as 240SX w/ Rear Z32 Caliper conversion and 4-lug spindles.
P2M rear traction links for S13/S14 is constructed from high strength S45C alloy. The purpose of the rear traction links is to be able to adjust caster setting for the rear and...
P2M Rear Upper Control Camber Arms, RUCA - Nissan 240SX S13 S14, Silvia S15, 300ZX Z32, Skyline R32 R33 R34.
P2M adjustable muffler hanger bushing is 50% stiffer over stock rubber bushing. The 3 hole configuration allow installer to choose the install height of the exhaust system (3...
P2M Z33 350Z front upper control arms are constructed from high strength S45C steel alloy. Unlike other cars, the 350Z once lowered required negative camber adjustment.
This Z33 350Z carbon rear boot dampers were built with high pressure gas shocks to withstand the weight of rear spoiler.
P2M suspension lock out washer kit was developed to replace the stock washer kit in preventing the suspension nuts from backing loose.
Phase 2 Motortrend features the Black Series Engine Hood Damper. Available in Matte Black and Carbon Fiber.
P2M Nissan Z33 350Z front fender brace is constructed from SPHC hot rolled steel with 4.5mm thick over lay construction. This fender brace is by far one of the strongest and...
P2M Nissan Z33 350Z & Infiniti G35 front lower tie brace. Constructed from T5 6061 4.5mm chambered aluminum that is light weight and still retain a strong rigid structure....
P2M Nissan Z33 350Z aluminum front strut brace reinforce the front 2 points of the shock tower. Constructed from T5 6061 chambered aluminum body for light weight and strength...
Nissan 350Z front sway bar end link upgrade. Replace the stock rubber end links with the P2M 3pc teflon lined pillow ball end links to enhance your sway bar performance and...
P2M 350Z inner tie rods were designed to replace and an upgrade over the stock tie rods. Comes with steering cone spacer for enhanced steering angle. This tie rod can also be...
P2M 350Z inner tie rods were designed to replace and an upgrade over the stock tie rods. Comes with steering cone spacer for enhanced steering angle. This tie rod can also be...